Pesticide crushing equipment

Classification of pesticide：

Pesticides are liquid or solid forms and gases. The use of pesticides varies according to the types of pests or diseases and the physical properties of the pesticides themselves. If made into powder spreading cloth, made into aqueous solution, suspension, emulsion injection, or made into steam or gas fumigation, etc.

Properties of powder pesticide:

Powder is a mixture of pesticide and filler. Some powders have stabilizers added. There are many kinds of fillers, commonly used clay, kaolin, talc, diatomite and so on.

Requirements for powder quality, including powder fineness, moisture content, pH value, etc. Powder fineness index, generally 95% ~ 98% through 200 mesh, powder average diameter of 30 mm; Through 300 mesh, the average diameter of powder particles is 10~15 microns. The average diameter of the powder particles was 5~12 microns through 325 mesh (supermesh fineness). Moisture content is generally required to be less than 1%. PH 6 ~ 8.

Powder is mainly used for dusting, dusting, mixing toxic soil, etc., can not add water spray。

Equipment selection：

        For the performance of pesticide powder, it is recommended to choose zj-c series mechanical grinder

The working principle of：

      The material is transported from the feeding device to the crushing chamber of the main machine. The material and high-speed rotary devices and particles impact, collide, rub, cut and squeeze each other to achieve crushing. The crushed material can be separated by the grading wheel, the coarse powder flows into the crushing chamber for grinding again, and the purified gas is discharged by the induced draft fan.

The process flow：

Characteristics of the equipment：

1, low energy consumption: set centrifugal crushing, impact crushing, extrusion crushing in one, than other types of mechanical grinder energy saving up to 40 ~ 50%.

2. High fineness: equipped with self-dividing flow grading system, the product fineness 2500 mesh.

3. Large feeding range: the feeding particle size is 50mm, and the material only needs to pass through the first-level rough breaking equipment.

4. Low wear: comminution of wearing parts is made of new composite wear-resistant materials with long service life and no pollution when processing materials with mohs hardness less than or equal to 5.

5, strong mechanical stability: long-term 24 hours non-stop production.

6. Full functions:

It can crush needle-like materials to achieve the finished length-diameter ratio of 15:1;

The grinding process has no temperature rise and is suitable for the grinding of heat-sensitive materials.

The particle size recovery rate can be up to 100%.

It has the function of particle shaping and effectively improves the packing density.

Materials capable of crushing fibrous tissue;

It can crush the material with high moisture content and has the function of drying.

Can crush the material with strong viscosity.

7, negative pressure production, no dust pollution, excellent environment.

8. High degree of automation, strong stability and easy operation.

9. The whole system adopts automatic control, which can realize one-key start and stop, simple and convenient operation and connection with central control can realize remote control.

Application fields: herbicide, fungicide, insecticide, wettable powder, imidacloprid, doxorubicin, chlorfenazole, trichlorfenazole, etc.

Technical parameters：

Application of the scene：